Digi Camouflage Wraplite
Digi Camouflage Wraplite skin set.
Wraplite - Specially made with ease of installation in mind, the skin wrap is slightly smaller than the wrap surfaces so users will have an easier time to paste it on. FREE SHIPPING IN SINGAPORE.
Made with premium vinyl sticker, water proof, weather proof, heat resistant up to 80 degrees Celsius. Comes with lamination that adds another layer of protection. Each skin wrap set comes with 1 piece deck wrap and 1 piece stem wrap.
We currently have templates suitable for the following electric scooters.
Type A - Zoom 2/ ETWOW2
Type B - Inokim 2015
Type C - Speedway 2/Speedway 1/Myway/ ST10/ Sonic Power*
*May require some trimming of the wrap at the base of the stem.
Step 1: Prior to installation, make sure the scooter surfaces are clean and free of dirt and grease.
Step 2: Spray on some water on the installation surface and also on the peeled stickers.
Step 3: Paste the stickers on the deck/stem, the wet surface allows you to adjust the stickers' position.
Step 4: Use a plastic ruler/card with a soft edge to flatten the sticker and to scrape out the excess water and bubbles.
Step 5: Allow to dry for 1 to 2 hours.
Care for sticker - Wipe with a wet cloth, use soap/detergent as necessary. Do not clean with solvents, thinner.
We Also Recommend